Rubber & Plastics
User guide material
| Material | HangOn | Intermittent max temp (ºC) | Continous max temp (ºC) | Tensile strangth (MPa) | Elongation at break (%) | Compression set | Hardness (ShA) | |
|---|---|---|---|---|---|---|---|---|
| Silicone rubber | Q | 315 | 230 | 8 | 400 | 13% (22h @ 175ºC) | 30-80 | |
| GE Silicone Rubber | QGE | 315 | 230 | 10 | 500 | 25% (22h @ 175ºC) | 30-80 | |
| EPDM rubber | EPDM | 125* | 100 | 12 | 300 | 20% (22h @ 125ºC) | 40-80 | |
| SBR rubber | SBR | 100 | 90 | 14 | 500 | 20% (22h @ 70ºC) | 40-80 | |
| Natural rubber | NR | 90 | 80 | 21 | 500 | 20% (22h @ 70ºC) | 40-80 | |
| Thermoplastic elastomer | TPE | 150 | 135 | 8 | 500 | 35% (22h @ 70ºC) | 50-95 |
| Material | Alcalis | Acids | UV | Abrasion | Tear | Density (g/cm³) | Water absorption (24h, 20ºC) | |
|---|---|---|---|---|---|---|---|---|
| Silicone rubber | D | C | A | E | E | 1,18 | 0 | |
| GE Silicone rubber | D | C | A | E | E | 1,18 | 0 | |
| EPDM rubber | D | A | B | C | D | 1,25 | 0 | |
| SBR rubber | D | D | D | C | D | 1,25 | <0,1 | |
| Natural rubber | E | D | D | A | C | 1,2 | <0,1 | |
| Thermo | D | B | E | C | B | 0,95 | <0,1 |
