HangOn Custom produktuviklingsprosess

Hvert år tar vi opp tusenvis av spesielle løsninger, og vi har skapt en velfungerende prosess for dette - HangOn Custom produktuviklingsprosess

HangOn er eksperter på sitt felt og har dyp kunnskap om alle små detaljer i industriell lakkering. Utviklingsavdeling har flere tiår med erfaring i å utvikle spesielle løsninger for lakkindustrien.

De lytter nøye til dine behov og samler informasjon for å utvikle innovative og smarte løsninger. De analyserer hvordan du løser forskjellige oppgaver i din spesifikke lakkkeringsprosess på best mulig måte. Å finne den smarteste løsningen for dine individuelle behov tar tid - men vår erfaring har lært oss at hver investert time gir utbytte når det gjelder økt langsiktig lønnsomhet.


Customization

General considerations

Before choosing a hanging solution, it is important to understand the coating process. Consider the size, shape and weight of parts, how they move through the line, and what happens during each step. Small details can have a big impact on coating quality, handling and efficency.

PRE-TREATMENT DRAINAGE

Objects may need to be positioned to allow liquids to flow easily and quickly. For dip pre-treatment take lift forces and air pockets into consideration.

COATING PROCESS

Type of coating system, pre-treatment and temperature exposure.

ERGONOMICS

Find the simplest possible hanging and masking method to reduce personal strain for staff. Use smart tools such as TPR.

LOGISTICS

How are goods transported througout the coating process? Type of conveyor or cargo carrier? What happens before and after coating? Perhaps reduced handling can make the process more efficient?

QUANTITY

Number per batch, per year and total.

PLANT CROSS SECTION

What is the maximum goods size? Free space to conveyor/notched rail, type of cargo carrier/notched rail, potential slit openings.

CURVES & SLOPES

Smallest curve radius, smallest slope radius, largest slope angle

PHYSICAL PRODUCT

Weight, dimensions, A/B surfaces, possible hanging holes, versions.

TIME FRAMES

How fast do you need a solution? Prototypes and serial production.

BUDGETS

Target cost per coated object? How much can be invested?

Hanging-specific considerations

HANGING DIRECTION

Does the object need to be positioned in a specific way to enable efficient and simple coating?

HANGING DENSITY

Objects per conveyor metre/cargo carrier?

A/B SURFACES

Specify which surfaces are to be fully coated (A) and those that will not be coated (B).

HANGING MARKS

Where are hanging marks acceptable? How big a mark is acceptable?

SECURE GROUNDING

Make sure that the object is securely grounded to potential-free earth every time to ensure even coating and coating savings for electrostatic coating.

Masking-specific considerations

DEGREE OF MASKING

Sometimes some splashes are acceptable on part of or on a whole non-coated surface.

SOFT/SHARP EDGES

Between the masked and coated surface a more or less sharp edge can occur.

RECYCLABILITY

Do you want to recycle masking material or not? This is often a matter of quality assurance.

TOLERANCES

A masked surface has geometric position and measurement tolerances.

ACCEPTANCE OF FLAKES

When reusing masking products old coating flakes may remain and contaminate later batches.

APPLICATION/REMOVAL

Take into consideration how masking products are used, both for application and removal.

Search